Here's how it works
Sand the entire cabinet, wipe off the sander dust.
A glaze with a lot of water from Umbra gebr., Sienna gebr. and little Black produce. Apply several times with a sponge until the desired shade is achieved
Then apply an antique white glaze twice and finally a covering layer of antique white.
Important: Sand the cabinet after each coat and also at the end, wipe off the sanding dust each time.
Cut out the different motifs from Straw silk paper and arrange them according to your taste, stick them on with Napkin varnish .
Mix the relief casting compound according to the manufacturer's instructions and pour it into the casting mould
Important: The casting compound must be stirred into the water - not the other way round - to avoid lumps.
Knock the mould flat on a towel after about 30 minutes and remove the ornaments. Then immediately deburr and smooth the edges with a scalpel and Sandpaper .
Now paint the ornaments with a dark glaze, wipe the edges of the ornaments with a dry cloth and sand lightly again.
Drill a hole in the round ornaments and fix them to the cabinet with Screw hooks and mounting glue.
Glue on the remaining ornaments.
After the mounting adhesive has dried, seal the entire cabinet weatherproof with colourless Patio Paint.
Paint the flap inside with Board paint .