- Secure order
- Easy return shipment
- Service-Hotline 01 662 20 20
With this Casting mould "Wind light base" can be cast 2 chic tealight holders. The mold has a total size of approx. 16.5 x 24 cm with a filling capacity of approx. 180 ml. The candle holders have a size of Ø approx. 10 cm with a height of approx. 1.8 cm.
Ideally suited for concrete and white creative casting slip. At will, the tealight holders can be kept plain or the mass is colored in advance or hardened creatively painted. The recess is suitable for conventional tea lights with a Ø of about 3.9 cm. In addition, an open lantern glass with a Ø of about 8 cm can be placed on top. This creates an atmospheric decoration, which can also be placed prima on the garden table.
Tips to use:
Preparations:
Mix the desired casting compound according to the instructions. If you wish, you can color it with color pigment powder.
Application:
Slowly pour the mixed casting compound into the casting mould. Leave a rim of at least 2 mm free to make it easier to demould your casting later.
Gently tap the casting mould so that the mixture is evenly distributed and any air bubbles come to the surface. You can then prick these with a lace object.
Time to dry:
Allow the casting compound to harden well. Follow the drying times specified in the instructions for the casting compound.
Work to finish:
You can now demould your casting. If the casting does not come off simply by dropping it, you can carefully loosen the mould all around with your fingers and tap it against the mould.
Good to know:
For detailed moulds, we recommend using a mould release agent or release wax to protect the mould.
