Viva Decor Blob Paint, 90 ml, Metallic/Glitter
Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml Content: 90 ml
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
All prices plus shipping
Description
With the Viva Decor Blob Paint colours in metallic or glittering finish, unique works of art with a shimmering 3D look can be created. The bottles are immediately ready for use and have a content of 90 ml.
There are Blob Painting Colour dots are layered on top of each other, thus creating a three-dimensional effect. The bottle is held vertically over the painting ground and an individual work of art is created blob for blob. As a basis is suitable a Stretched Canvas or a flat painting ground. The picture becomes particularly exciting when the bottle is pulled a little over the edge of the painting ground. A blob should dry for about 24 hours, so that the next layer will not run off.
A stylish, chic image is achieved with the metallic and glittering colours in combination with plain blobs. Simply beautiful and different every time. Achieve blob for blob a fantastic work of art.
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling
Tips to use:
Applicable to: Glass, wood, stretcher frame, Paper, tiles.
Apply with: Straight from the bottle.
Preparations: The surface must be even so that the ink stains do not run.
Time to dry: 24 hours.
This is to be noted: Each ink stain needs a drying time of about 24 hours before the next dot is applied. This prevents the ink from running off. The surface should be horizontal.
Notices under the CLP Regulation
- not subject to classification/labelling